Active Image; Download/Backup Configuration Or Logs - Cisco 220 Series Smart Plus Administration Manual

Administration: File Management

Active Image

STEP 5
Active Image
STEP 1
STEP 2
STEP 3
STEP 4

Download/Backup Configuration or Logs

Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Click Apply.
There are two firmware images, Image1 and Image2, stored on the switch. One of
the images is identified as the active image and other image is identified as the
inactive image. The switch boots from the image you set as the active image. You
can change the image identified as the inactive image to the active image. (You
need to reboot the switch.)
To select the active image:
Click Administration > File Management > Active Image.
The following fields are displayed:
• Active Image—Displays the image file that is currently active on the switch.
• Active Image Version Number—Displays the firmware version of the active
image.
• Active Image Version Number After Reboot—Displays the firmware
version of the active image as it be after reboot.
Select the image from the Active Image After Reboot drop-down menu to
identify the firmware image that is used as the active image after the switch is
rebooted.
Click Apply.
Reboot the switch. The switch will boot with the selected active image.
The Download/Backup Configuration/Log page enables:
• Backing up configuration files or logs from the switch to an external device.
• Restoring configuration files from an external device to the switch.
4
46