Cisco 220 Series Smart Plus Administration Manual page 56

Administration: File Management
DHCP Auto Configuration
STEP 3
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
• Backup Configuration File—Enter the full file path and name of the
configuration file on the backup TFTP server to be used if no configuration
file name is specified in the DHCP message.
• Last Auto Configuration TFTP Server IP Address—Displays the IP
address or domain name of the TFTP server that is currently using.
• Last Auto Configuration File Name—Displays the name of the
configuration file located on the TFTP server that is currently using.
Click Apply. The DHCP Auto Configuration parameters are defined, and the
Running Configuration is updated.
4
54