Setting The Session Timeout Value; Configuring Network Management; Configuring Snmp - Cisco RV180 Administrator's Manual

Administering Your Cisco RV180/RV180W

Configuring Network Management

STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
Configuring Network Management
STEP 1
STEP 2
Cisco RV180/RV180W Administration Guide
Enter the new password. It is recommended that passwords contains no
dictionary words from any language, and are a mix of letters (both uppercase and
lowercase), numbers, and symbols. The password can be up to 30 characters.
Click Save.

Setting the Session Timeout Value

The timeout value is the number of minutes of inactivity that are allowed before the
Device Manager session is ended. This can be configured for the Admin and
Guest accounts:
Choose Administration > Session Timeout.
In the Administrator Inactivity Timeout field, enter the number, in minutes, before an
administrator login session times out due to inactivity.
In the Guest Inactivity Timeout field, enter the number, in minutes, before a guest
login session times out due to inactivity.
Click Save.
The Cisco RV180/RV180W supports Simple Network Management (SNMP) to
allow you to monitor and manage your router from an SNMP manager. SNMP
provides a remote means to monitor and control network devices, and to manage
configurations, statistics collection, performance, and security.

Configuring SNMP

To configure SNMP:
Choose Administration > Network Management.
Under SNMP, check Enable.
7
136