Quick Start Switch Configuration - Cisco 220 Series Smart Plus Administration Manual

Getting Started

Quick Start Switch Configuration

Quick Start Switch Configuration
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
The initial page displayed depends on the "Do not show this page on startup"
option on the Getting Started page. If you did not select this option, the initial page
is the Getting Started page. If you did select this option, the initial page is the
System Summary page.
To simplify switch configuration through quick navigation, the Getting Started
page provides links to the most commonly used pages.
Category Link Name (on the Page)
Initial Change Management
Setup Applications and Services
Change Device IP Address
Create VLAN
Configure Port Settings
Device System Summary
Status
Port Statistics
RMON Statistics
View Log
Linked Page
Security > TCP/UDP Services
page
Administration > Management
Interface > IPv4 Interface page
VLAN Management > Create
VLAN page
Port Management > Port Setting
page
Status and Statistics > System
Summary page
Status and Statistics > Interface
page
Status and Statistics > RMON >
Statistics page
Status and Statistics > View Log >
RAM Memory page
1
12