Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
STEP 1
STEP 2
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
To view LLDP overloading information:
Click Administration > Discovery LLDP > LLDP Overloading.
The following fields for each port is displayed:
•
Interface—Port identifier.
•
Total Bytes In-Use—Total number of bytes of LLDP information in each
packet.
•
Available Bytes Left —Total number of available bytes left for additional
LLDP information in each packet.
•
Status—If TLVs are transmitted, or if they are overloaded.
To view LLDP overloading details for a port, select it and click Details.
The following information for each TLV sent on the port is displayed:
•
LLDP Mandatory TLVs
Size (Bytes)
-
Status
-
—If the mandatory TLV group is transmitting, or if the TLV group
was overloaded.
•
LLDP MED Capabilities
Size (Bytes)
-
Status
-
—Whether the LLDP MED capabilities packets were sent or they
were overloaded.
•
LLDP MED Location
Size (Bytes)
-
Status
-
—Whether the LLDP MED location packets were sent or they were
overloaded.
•
LLDP MED Network Policy
Size (Bytes)
-
Status
-
—If the LLDP MED network policies packets were sent, or if they
were overloaded.
•
LLDP MED Expanded Power via MDI
—Total mandatory TLV byte size.
—Total LLDP MED capabilities packets byte size.
—Total LLDP MED location packets byte size.
—Total LLDP MED network policies packets byte size.
8
90
Advertisement
Table of Contents
