Cisco 220 Series Smart Plus Administration Manual page 18

Getting Started
Window Navigation
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Button Name
Add
Apply
Cancel
Clear All Interfaces
Counters
Clear Interface
Counters
Clear Logs
Clear Table
Close
Copper Test
Description
Indicates a mandatory field.
Click to display the related Add page and add an entry
to a table. Enter the information and click Apply to save
it to the Running Configuration. Click Close to return to
the main page. Click Save to display the Copy/Save
Configuration page and save the Running
Configuration to the Startup Configuration file type on
the switch.
Click to apply the changes to the Running
Configuration on the switch. If the switch is rebooted,
the Running Configuration is lost, unless it is saved to
the Startup Configuration file type or another file type.
Click Save to display the Copy/Save Configuration
page and save the Running Configuration to the
Startup Configuration file type on the switch.
Click to reset the changes made on the page.
Click to clear the statistics counters for all interfaces.
Click to clear the statistics counters for the selected
interface.
Clears log files.
Clears table entries.
Returns to the main page. If any changes were not
applied to the Running Configuration, a message
appears.
Click Copper Test to perform the related test.
1
16