Cisco 220 Series Smart Plus Administration Manual page 89

Administration: Discovery
Configuring LLDP
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Endpoint Class 1—Indicates a generic endpoint class, offering basic
LLDP services.
Endpoint Class 2—Indicates a media endpoint class, offering media
streaming capabilities, as well as all Class 1 features.
Endpoint Class 3—Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 switch support,
and device information management capabilities.
PoE Device Type
-
example, powered.
PoE Power Source
-
source.
PoE Power Priority
-
priority.
- PoE Power Value
Hardware Revision
-
Firmware Revision
-
- Software Revision
Serial Number
-
Manufacturer Name
-
- Model Name —Device model name.
Asset ID
- —Asset ID.
• Location Information
- Civic —Street address.
Coordinates
- —Map coordinates: latitude, longitude, and altitude.
ECS ELIN
- —Emergency Call Service (ECS) Emergency Location
Identification Number (ELIN).
• Network Policy Table
Application Type
-
VLAN ID
- —VLAN ID for which the network policy is defined.
—(Only applicable for PoE models) Port PoE type, for
—(Only applicable for PoE models) Port power
—(Only applicable for PoE models) Port power
—(Only applicable for PoE models) Port power value.
—Hardware version.
—Firmware version.
—Software version.
—Device serial number.
—Device manufacturer name.
—Network policy application type, for example, Voice.
8
87