Using the Console Interface
Connecting By Using a Terminal Emulation Application
STEP 6
STEP 1
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
HyperTerminal - Connect To Window (TCP/IP option selected)
Continue to the
Communicating by Using a Console Cable Connection
or the
Communicating By Using a TCP/IP Connection
Communicating by Using a Console Cable Connection
In this procedure, Com 3 is used for the example. The parameter on your system
might be different.
To display the console:
Configure the COM3 Properties > Port Settings with the following connection
parameters:
•
Bits per second = 9,600
•
Data bits = 8
•
Parity = None
•
Stop bits = 1
•
Flow control = None
20
section
section.
281