Cisco 220 Series Smart Plus Administration Manual page 98

Administration: Discovery
Configuring CDP
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
• Version TLV
Version
- —Information about the software release on which the device is
running.
• Platform TLV
- Platform —Identifier of platform advertised in the platform TLV.
• Native VLAN TLV
Native VLAN
- —The native VLAN identifier advertised in the native VLAN
TLV.
• Full/Half Duplex TLV
Duplex
- —Whether port is half or full duplex advertised in the full/half
duplex TLV.
• Appliance TLV
Appliance ID
- —Type of device attached to port advertised in the
appliance TLV.
Appliance VLAN ID
-
instance if the appliance is an IP phone, this is the voice VLAN.
• Extended Trust TLV
Extended Trust
-
the host/server from which the packet is received is trusted to mark the
packets itself. In this case, packets received on such a port are not
remarked. Disabled indicates that the port is not trusted in which case,
the following field is relevant.
• CoS for Untrusted Ports TLV
CoS/802. 1 p for Untrusted Ports
-
port, this fields displays the Layer 2 CoS value, meaning, an 802. 1 D/
802. 1 p priority value. This is the COS value with which all packets
received on an untrusted port are remarked by the device.
• Power TLV (Only applicable for PoE models)
Request ID
- —(Only applicable for PoE models) Last power request ID
received echoes the Request-ID field last received in a Power Requested
TLV. It is 0 if no Power Requested TLV was received since the interface
last transitioned to Up.
—VLAN on the device used by the appliance, for
—Enabled indicates that the port is trusted, meaning that
—If Extended Trust is disabled on the
8
96