Querying Dynamic Addresses - Cisco 220 Series Smart Plus Administration Manual

MAC Address Tables

Querying Dynamic Addresses

Querying Dynamic Addresses
STEP 1
STEP 2
STEP 3
STEP 4
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Use the Dynamic Address page to query the dynamic addresses according to the
following criteria:
• Interface type
• MAC address
• VLAN ID
This page displays the dynamically-learned MAC addresses. You can clear the
dynamic addresses from the MAC address table and specify a query criteria to
display a subset of the table, such as the MAC addresses learned on a specific
interface. You can also specify how the query results are sorted. If no filter criteria
are entered, the entire table is displayed.
To query dynamic addresses:
Click MAC Address Tables > Dynamic Address.
Enter the following query criteria:
• VLAN ID equals to —Check and enter the VLAN ID for which the table is
queried.
• MAC Address equals to—Check and enter the MAC address for which the
table is queried.
• Interface equals to—Check and select the interface for which the table is
queried. The query can search for specific port or LAG.
• Dynamic Address Table Sort Key—Select the key by which the table is
sorted. The address table can be sorted by VLAN ID, MAC address, or
interface.
Click Go. The Dynamic Address Table is queried and the results are displayed.
Click Clear Table to delete all dynamic MAC addresses.
13
155