Cisco 220 Series Smart Plus Administration Manual page 240

Access Control
Configuring ACL Binding
STEP 5
STEP 6
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Select one of the following:
• Select MAC-Based ACL—Select a MAC-based ACL to be bound to the
interface.
• Select IPv4-Based ACL—Select an IPv4-based ACL to be bound to the
interface.
• Select IPv6-Based ACL—Select an IPv6-based ACL to be bound to the
interface.
Click Apply. The ACL binding setting is modified, and the Running Configuration is
updated.
If no ACL is selected, the ACL(s) that is previously bound to the interface is
NOTE
unbound.
17
238