Table of Contents
Advertisement
Configuring Security
Configuring 802. 1 X
STEP 4
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
•
Max EAP Requests—Enter the maximum number of EAP requests that can
be sent. If a response is not received after the defined period (supplicant
timeout), the authentication process is restarted.
•
Supplicant Timeout—Enter the number of seconds that lapses before EAP
requests are resent to the supplicant.
Click Apply. The port settings are defined, and the Running Configuration is
updated.
Viewing Authenticated Hosts
The Authenticated Hosts page displays details about those users that have been
authenticated. These details include such details as the username used to
authenticate the user, the station MAC address, and the length of time that the user
has been logged on.
To view details about authenticated users, click Security > 802.1X >
Authenticated Hosts.
The Authenticated Hosts page displays the following fields:
•
User Name—Supplicant names that were authenticated on each port.
•
Port—Port identifier.
•
Session Time (DD:HH:MM:SS)—Amount of time that the supplicant was
logged on the port.
•
Authentication Method—Displays the method used to authenticate the last
session.
•
MAC Address—Displays the supplicant MAC address.
16
204
Advertisement
Table of Contents
