Table of Contents
Advertisement
Administration: Discovery
Configuring LLDP
STEP 4
STEP 5
STEP 1
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
Click Apply. The LLDP MED port settings are modified, and the Running
Configuration is updated.
Click LLDP Local Information Detail to see the details of the LLDP and LLDP MED
TLVs sent to the neighbor.
Viewing LLDP Port Status
The LLDP Port Status page displays the LLDP global information, as well as the
LLDP status for every port.
To view the LLDP port status:
Click Administration > Discovery LLDP > LLDP Port Status.
Th LLDP Port Status page displays the following LLDP global information:
•
Chassis ID Subtype—Type of chassis ID (for example, MAC address).
•
Chassis ID—Identifier of chassis. Where the chassis ID subtype is a MAC
address, the MAC address of the switch is displayed.
•
System Name—Name of switch.
•
System Description—Description of the switch (in alpha-numeric format).
•
Supported System Capabilities—Primary functions of the device, such as
Bridge, WLAN AP, or Router.
•
Enabled System Capabilities—Primary enabled function(s) of the device.
•
Port ID Subtype—Type of the port identifier that is shown.
The LLDP Port Status Table displays the following LLDP information for each
interface:
•
Interface—Port identifier.
•
LLDP Status—LLDP publishing option.
•
LLDP MED Status—Enabled or disabled.
•
Local PoE—(Only applicable for PoE models) Local PoE information
advertised.
•
Remote PoE—(Only applicable for PoE models) PoE information advertised
by the neighbor.
8
84
Advertisement
Table of Contents
