Configuring Dos Protection; Secure Core Technology (Sct); Default Configuration - Cisco 220 Series Smart Plus Administration Manual

Configuring Security

Configuring DoS Protection

Configuring DoS Protection
Cisco 220 Series Smart Plus Switches Administration Guide Release 1.0.0.x
A Denial of Service (DoS) attack is a hacker attempt to make a device unavailable
to its users. DoS attacks saturate the device with external communication
requests, so that it cannot respond to legitimate traffic. These attacks usually lead
to a device CPU overload.
The DoS protection feature is a set of predefined rules that protect the network
from malicious attacks. The DoS Security Suite Settings enables activating the
security suite.
This section describes how to configure the DoS protection features and includes
the following topics:
•

Secure Core Technology (SCT)

•

Default Configuration

• Configuring DoS Security Suite Settings
• Configuring SYN Protection
Secure Core Technology (SCT)
One method of resisting DoS attacks employed by the switch is the use of SCT.
SCT is enabled by default on the switch and cannot be disabled.
The Cisco device is an advanced device that handles management traffic,
protocol traffic and snooping traffic, in addition to end-user (TCP) traffic. SCT
ensures that the switch receives and processes management and protocol traffic,
no matter how much total traffic is received. This is done by rate-limiting TCP
traffic to the CPU.
There are no interactions with other features.
SCT can be monitored on the Denial of Service > Security Suite Settings page (by
clicking the Details button).
Default Configuration
The DoS protection feature has the following defaults:
• The DoS protection feature is disabled on all the ports by default.
• The DoS protection feature is enable in security suite by default.
16
205