Running A Mimic Tour; Deleting A Mimic Tour; Exiting The Mimic Tour Menu; Configuring The Home Setting - Honeywell HDZ30A User Manual

72 | HDZ Series Analogue PTZ User Manual
3.

Running a Mimic Tour

After tour setting is completed, press the IRIS+ key to run the selected Mimic Tour (see
Selecting a Mimic Tour on page 71

Deleting a Mimic Tour

Users can command the HDZ Series Analogue PTZ Dome to delete the selected Mimic Tour.
Move the cursor to DELETE and press the IRIS+ key (ENTER) to delete the selected Mimic
Tour (see
to be deleted).

Exiting the Mimic Tour Menu

Exit the MIMIC TOUR setup menu and go back to the MAIN PAGE 2 to carry on setup of the
camera.

Configuring the Home Setting

Users are able to set a Home Setting operation mode to ensure constant monitoring. If the HDZ
Series Camera idles for a set period of time, the selected function, called the HOME function,
will be automatically activated. The HOME function allows constant and accurate monitoring to
avoid the Analogue PTZ Dome idling or missing events.
www.honeywell.com/security
The cursor moves to RECORD END when you are building the tour route. When you have
finished plotting the tour, press IRIS+ to save the tour.
Note Users can also execute the Mimic Tour through a keyboard/controller. Please
refer to the keyboard's documentation for more information about executing PTZ
commands.
Selecting a Mimic Tour on page 71
Figure 4-22 Home Setting Menu
HOME SETTING
HOME FUNCTION
SELECT MODE
PRESET POINT
RETURN TIME
GO
EXIT
for more information on selecting a tour to run).
for more information on selecting the Mimic Tour
OFF →
PRESET →
001 →
001MIN →
ENTER
↓
YES