Connecting Power; Connecting Alarm Inputs/Outputs; Figure 2-7 Main Power Adapter Input (Detail); Figure 2-8 Main Alarm Adapter Input (Detail) - Honeywell HDZ30A User Manual

Connecting Power

WARNING
should be employed when powering the camera.
Refer to
camera.
CAUTION
here before connecting to the power source. The 24 V AC power source
should be connected to the first and third pin. The unit could be damaged
with an incorrect connection.

Connecting Alarm Inputs/Outputs

Refer to
main alarm adapter.
I/O 1 2 3 4 5 6 7 8 9 10 11 12
To comply with EN50130-4 requirements, a UPS
Figure 2-7 and Table 2-6
Check the pin definition of the power connector listed
Figure 2-7 Main Power Adapter Input (Detail)
1 2 3
Table 2-6 Power Input Pin Definitions
Pin Definition
1 24 V AC - 1
2 GND
3 24 V AC - 2
Figure 2-8 and Table 2-7
Figure 2-8 Main Alarm Adapter Input (Detail)
for the power connector definition before wiring power to the
when making alarm connections to your camera through the
Inputs (x4) 5V, 4700 Ohms, pull up
Outputs (x2)
Installing the Camera | 29
Relay output, 120 V AC/30 V DC
800-16526 - A - 07/2014