Setting Auto Ir Function; Setting Manual Ir Function; Configuring The Alarm Setting; Selecting An Alarm Pin - Honeywell HDZ30A User Manual

Setting Auto IR Function

With the Auto IR Function, the Internal circuit will automatically decide the occasion to remove
the IR cut filter according to the value of light condition, as calculated by the internal light
algorithm. The Auto THRESHOLD options include LOW, MID and HI. LOW indicates a higher
sensitivity and can improve the reliability of the lens so that it is easier to switch to Day mode
and relatively difficult to change into Night mode (that is, ambient lighting must be very low to
switch to night mode). HI indicates that it is easier to switch to Night mode and difficult to change
into Day mode (that is, ambient lighting must be very high to switch to day mode).

Setting Manual IR Function

IR MANUAL ON
Select IR MANUAL ON to remove the IR cut filter. The camera will be in B/W (Night) mode until
it is manually changed.
IR MANUAL OFF
Select IR MANUAL OFF to attach the IR cut filter. The camera will be in Color (Day) mode,
disabling the IR function, until it is manually changed.

Configuring the Alarm Setting

The HDZ Series Analogue PTZ Dome provides four alarm inputs and two alarm outputs (N.O.
or N.C) to connect alarm devices. With this function, the Dome Camera can cooperate with the
alarm system to capture event images. For wiring, please refer to the installation guide and/or
qualified service personnel. Adjustable alarm parameters are described in the following
sections.

Selecting an Alarm Pin

The HDZ Series dome provides 4 alarm inputs and 2 output (N.O. or N.C.). Use the ALARM PIN
field to select the alarm input which you want to set its alarm-related parameters. Set the
selected alarm pin's alarm-related parameters in the Alarm Setting menu. For alarm pin
definitions, refer to
Figure 4-24 Alarm Setting Menu
ALARM SETTING
ALARM PIN
ALARM SWITCH
ALARM TYPE
ALARM ACTION
PRESET POINT
DWELL TIME
ALARM PRIORITY
ALARM OUTPUT
EXIT
Connecting Alarm Inputs/Outputs on page
Operation and Configuration | 75
1 →
OFF
→
NC →
PRESET →
001
→
001 SEC →
1 →
1+2 →
YES
29.
800-16526 - A - 07/2014