Disabling WDR
Deactivate the WDR function by selecting this OFF for this option.
Setting Up Privacy Masks
The Privacy Mask function aims to block any intrusive monitoring. Users can adjust the camera
view position by moving the camera with the joystick, and adjust the mask size and area with
the direction keys on the control keyboard. When setting a mask, it is suggested to set it at least
twice as big (height and width) than the object you want to be masked. The HDZ Series Camera
will assume the center of the selected view area as a starting point, and the joystick will be
locked as users enter the SET MASK menu (see
following sections for setting privacy masks.
The available area for setting a privacy mask is restricted within a tilt angle of 70 degrees. A
maximum of 20 masks can be displayed in one scene. All the settings are described in the
following sections.
Enabling Privacy Masks
Users can enable or disable the Privacy Mask function with the PRIVACY SWITCH item (see
Figure
Setting the Privacy Mask Transparency
The color of privacy masks can be set as transparent. Select ON in this field to display
transparent privacy masks (see
Setting the Privacy Mask Color
The color of privacy mask can be set through the COLOR field (see
colors are black, white, red, green, blue, cyan, yellow, magenta, and mosaic 1-3.
Note
The Image Flip function and the Image Inverse function will be disabled
automatically while the Privacy Mask function is enabled.
Figure 4-28
Privacy Mask Menu
PRIVACY MASK MENU
PRIVACY SWITCH
TRANSPARENCY
COLOR
SET MASK
CLEAR MASK
EXIT
4-28). Set this item to ON before configuring the mask zones.
Setting Up the Mask on page
OFF
→
OFF
→
BLACK
→
01
↓→
01
↓→
YES
Figure
4-28). This setting is OFF by default.
Operation and Configuration | 81
82). Refer to the
Figure
4-28). The available
800-16526 - A - 07/2014