74 | HDZ Series Analogue PTZ User Manual
Setting the Return Time
The HDZ Series Analogue PTZ Dome starts to count down the RETURN TIME when the dome
idles, and then will execute the SELECT MODE function when the return time elapses. Select
the RETURN TIME that is best for your dome installation (time ranges from 1 to 128 minutes).
Executing Home Function (GO)
If the HOME function is enabled and configured, users can execute the HOME function by
selecting GO and pressing IRIS+.
Exiting the Home Menu
Exit the HOME setup menu and go to the MAIN PAGE 3 to carry on setup of the camera.
Main Menu Page 3 Settings
MAIN PAGE 3 is the third menu page (see
the MAIN PAGE 2. See the following sections for more information about changing settings in
this menu.
Setting the IR Function (Removable IR Cut Filter)
With the IR cut filter, the HDZ Series Dome Camera can capture clear images at night time or in
low light conditions. During the day time, the IR cut filter will be on to block the infrared light for
a clear image. During the night time, the IR cut filter will be removed to let the camera catch
infrared light, and the displayed images will become black and white.
www.honeywell.com/security
Figure 4-23
Main Menu Page 3
MAIN PAGE3
IR FUNCTION
ALARM SETTING
MOTION DETECT
WDR FUNCTION
PRIVACY MASK
TIME SETTING
SCHEDULE
EXIT OSD
Figure
4-23) that opens when users scroll down from
3/3
AUTO
↓→
ENTER
↓
ENTER
↓
OFF
→
ENTER
↓
ENTER
↓
ENTER
↓
YES