Table of Contents
Advertisement
8. Push the Joystick downward to select "SWAP" and set the swap by moving the
Joystick left and right to select the swap ON or OFF.
9. Select Save and Exit by pushing the Joystick to the right. Press ESC to exit the
program without saving.
17 + SCAN to automatically calls up the auto-pan function.
NOTE: Press
3.1.5 TOUR (or MENU => FUNCTION => TOUR, Short Cut: TOUR)
There are 8 programmable Tours. Each Tour consists of up to 64 Preset positions, Patterns,
Scans or other Tours. Using second-level Tours, it can be expanded to over 56 functions in a
single Tour. However tours second level Tours will be ignored when called by a Tours. This can
be best illustrated by the following example:
If
Tour 01 : Preset 02, Preset 03,Tour 02, Tour 03
Tour 02 : Preset 05, Preset 06,
Tour 03 : Preset 07, Pattern 01
Tour 04 : Preset 08. Preset 05, Pattern 01
Tour1 executes as follows:
Preset 02 è Preset 03 è Preset 05 è Preset 06 è Preset 05 è Preset 07 è Pattern
01 è ... (Repeat)
Tour 02 executes as follows:
Preset 05 è Preset 06 è Preset 08 è Preset 05 è Pattern 01 èPreset 05 ...
Repeat (Tour4 is still valid if called directly from Tour2.)
Tour
---Tour 04
in Tour 02 will be skipped in Tour 01
TOUR 01:xxxxxxxxxxxxxxxx
Func No
S DW Title
PRST 248 S 99 ----------------
PTRN 004 S 99 ----------------
SCAN 016 S 99 ----------------
TOUR 008 S 99 ----------------
---- --- - -- ----------------
---- --- - -- ----------------
---- --- - -- ----------------
---- --- - -- ----------------
Prev
Save And Exit
xxxxx
: 16 digits of title for tour label
- - -
: blank preset position
Speed
: Fast (Normal)/ Slow D. Scan/ Medium D. Scan
DWell
: 01-99 Sec
PRST
: Preset 1~248
PTRN
: PATTERN 1~4
SCAN
: SCAN 1~16
TOUR
: TOUR 2~8
04, Preset 05
Next
22
01/08
Advertisement
Table of Contents
