Setting Up The Mask; Clearing A Mask; Figure 4-29 Set Mask Menu - Honeywell HDZ30A User Manual

82 | HDZ Series Analogue PTZ User Manual

Setting Up the Mask

Use the control device to move the HDZ Series Camera to the area where you want to set a mask
and return to the OSD menu. Select the mask number and press IRIS+ to enter the SET MASK
menu (see
position as a privacy mask position.
H CENTER
The original horizontal center of a mask zone is the center of the screen. Users are able to move
a mask zone to another position by adjusting the horizontal value with the joystick or
LEFT/RIGHT keys on the keyboard. The camera will pan right or left according to user's control.
V CENTER
The original vertical center of a mask zone is the center of the screen. Users are able to move a
mask zone to another position by adjusting the vertical value with the joystick or LEFT/RIGHT
keys on the keyboard. The camera will tilt up or down according to user's control.
H SIZE (00~80)
Users can adjust the horizontal size of a privacy mask through the H SIZE setting. Setting the H
and V size to 0 can also delete the selected mask.
V SIZE (00~60)
Users can adjust the vertical size of a privacy mask through the V SIZE setting. Setting the H
and V size to 0 can also delete the selected mask.
Exiting the Mask Menu
Exit the Mask Menu and go back to the Privacy Mask menu to continue setting the privacy mask
options.

Clearing a Mask

Users can delete a preset mask zone with this option. Please follow the steps below:
1.
2.
www.honeywell.com/security
Figure 4-29). The HDZ Series Analogue PTZ Dome will memorize the present
Figure 4-29 Set Mask Menu
MASK MENU 01
H CENTER
V CENTER
H SIZE
V SIZE
EXIT+SAVE
Select the mask zone that will be erased (01, for example).
Press IRIS+ to confirm the selection.
L/R
D/U
000 →
000 →
YES