Using The Osd Password To Login; Figure 4-12 Password Sub Menu; Figure 4-13 Enter Password Screen - Honeywell HDZ30A User Manual

62 | HDZ Series Analogue PTZ User Manual
Use the following procedure to set the password:
1.
2.
3.

Using the OSD Password to Login

If OSD Password function is enabled, when you enter the OSD menu, the password request
message will be displayed as shown in
and press IRIS+ to access the OSD main menu.
www.honeywell.com/security
Figure 4-12 Password Sub Menu
NEW PASSWORD
CONFIRM PASSWORD : _ _ _ _
0123456789
DELETE SAVE EXIT
Choose a number for the password with direction keys and then press the IRIS+ key
(ENTER) to input that number in the NEW PASSWORD field.
 
For example: 0 IRIS+
password 0123.
In the CONFIRM PASSWORD line, enter the same password again to confirm the setting.
Move the cursor to SAVE and press IRIS+ to save the setting. This will log you out of the
OSD menu.
Note If needed, move the cursor to EXIT and press IRIS+ to exit the password
setting page without saving.
To delete an entered password character, move the cursor to DELETE and
press IRIS+ to delete the previously entered character.
Figure 4-13 Enter Password Screen
PLEASE ENTER PASSWORD
_ _ _ _
0123456789
DELETE ENTER EXIT
Note When the Password Function on, please enter the Master Passport if the
manually entered password has been forgotten.
Master Password: 9527.
: _ _ _ _
  
1 IRIS+ 2 IRIS+
Figure 4-13. Please enter the password, select ENTER,
 
3 IRIS+ gives you the