Deleting A Preset Title; Exiting The Preset Menu; Setting Up A Preset Tour; Selecting The Preset Tour Number - Honeywell HDZ30A User Manual

5.
6.

Deleting a Preset Title

To delete the title for a preset point, select the preset to delete the title of in the PRESET POINT
field, then move the cursor to CLEAR TITLE and press IRIS+.

Exiting the Preset Menu

Exit the PRESET menu and go back to the MAIN PAGE 2 to carry on setup of the camera.

Setting Up a Preset Tour

The preset tour feature executes a programmed path of the pan, tilt, zoom and focus functions
for the camera in a certain sequence. Before setting up this function, users must have
pre-defined at least two preset positions (see

Selecting the Preset Tour Number

There are 16 sets of preset tours built in to the HDZ Series Analogue PTZ Dome. Use the joystick
or LEFT/RIGHT direction keys to select a tour number first, before setting its preset numbers
(see

Selecting a Preset Number

Up to 32 preset positions can be setup for each Preset Tour. The Preset Numbers represent the
order of the preset positions that the HDZ Series Camera will automatically run through. The
preset position programmed as preset number 1 will be the first position of the tour, followed by
number 2, 3, and so on. Use the joystick or LEFT/RIGHT direction keys to select a Preset
Number to program.
The next setup items, including PRESET POSITION, SPEED and DWELL TIME, will influence
how the camera runs through each selected preset point.
When the title is complete, move the cursor to SAVE and press IRIS+.
The new title will now display when viewing the preset it was set for.
Figure 4-18 Preset Tour Menu
PRESET TOUR
PRESET TOUR NO
PRESET NO.
PRESET POS.
SPEED
DWELL TIME
RUN PRE TOUR
DELETE
EXIT
Figure 4-18).
Operation and Configuration | 67
Setting Up a Preset Position on page
01 →
01 →
END →
01 →
000SEC
→
ENTER ↓
ENTER ↓
YES
65).
800-16526 - A - 07/2014