5.5
CAMERA OPTIONS, CONTINUED
5.5.6
Vertical Phase
Options 6 (Vertical Phase Edge) and 7
(Vertical Phase 1-180) are not available with
the 843216-1010, 843216-1011, 843216-
1012, or 843216-1013 cameras.
Setting will display as NA.
5.6
FUNCTION PROGRAMMING
Select 6 to access programming options.
5.6.1
PTZ Tour
PTZ Tour – Select 1 to program, run, or
delete a PTZ (pan, tilt, zoom) tour.
This menu option is only displayed when
standard, MUX-100, or iPro protocol is
selected on the DIP switch on the scan.
Rev. D
1 Zoom and Focus
2 Exposure Control
3 NightShot Control
4 White Balance
5 Still PreShot ................................. OFF
6 Vert Phase Edge............................ NA
7 Vert Phase 1-180 ........................... NA
ESC to Exit
---- UltraDome KD6i ----
1 Language ............................. English
2 Display Options
3 Control Options
4 Diagnostic Options
5 Camera Options
6 Function Programming
ESC to Exit
FUNCTION PROGRAMMING
1 PTZ Tour
2 VectorScan
41
CAMERA OPTIONS
519543-1980
KDMU000799
02/6/04