Setting The Id Display; Setting Up The Zone Title Display; Enabling The Title Display; Entering A Zone Title Name - Honeywell HDZ30A User Manual

64 | HDZ Series Analogue PTZ User Manual

Setting the ID Display

If required, you can set the HDZ Series PTZ camera to display the ID number of the dome on
the screen to aid in identifying domes when monitoring video.
1.
2.
3.

Setting Up the Zone Title Display

HDZ Series users have the option to name a viewing area (zone) viewed with the PTZ camera,
so that the title will be displayed on-screen for easy recognition. Up to 16 zone titles can be set
for different PTZ positions (zones).
The title display option must be enabled (see
one title to be displayed must be input (see

Enabling the Title Display

1.
2.

Entering a Zone Title Name

Up to 16 zone titles can be set. Each zone title has a maximum of 20 characters.
Follow the steps in this procedure to set a camera zone title:
1.
2.
www.honeywell.com/security
Figure 4-14 Main Menu Page 2
MAIN PAGE2
ID DISPLAY
TITLE DISPLAY
ZONE TITLE
PRESET
PRESET TOUR
AUTOPAN
MIMIC TOUR
HOME SETTING
Press the direction key down to go from MAIN MENU page 1 to MAIN MENU page 2.
The ID DISPLAY menu item will be shown at the top of the screen.
Set ID DISPLAY to ON to enable the dome ID to display in the bottom right corner of the
screen (see #8 in Figure 3-3). Set ID DISPLAY to OFF to disable the dome ID.
Press the joystick or direction key down to go from MAIN MENU page 1 to MAIN MENU
page 2.
Set TITLE DISPLAY to ON to enable displaying the title on-screen when viewing video
from the camera.
Set TITLE DISPLAY to OFF to disable the on-screen title display.
Use the pan, tilt and zoom controls to operate the camera and move it to view the area
(zone) that you want to set the title for.
Turn on the OSD, and press the joystick or direction key down to go to MAIN PAGE 2.
2/3
OFF →
OFF →
01 ↓→
ENTER ↓
ENTER ↓
ENTER ↓
ENTER ↓
ENTER ↓
Enabling the Title Display, page
Entering a Zone Title Name, page
64), and at least
64).