Navigating Osd Menus; On-Screen Display Overview - Honeywell HDZ30A User Manual

Navigating OSD Menus

To select the setup item, use the joystick or direction keys on the keyboard to move the OSD
cursor in the OSD menu.
To setup items, use the joystick or direction keys on the keyboard to move the OSD cursor to
the item. For items with the
keys to select the function. For items with the
the control keyboard to open the sub menu for that item. For items with the
beside them, users can use the right/left joystick/direction keys to select the functions, and then
press the IRIS+ key to open the sub menu for the selected item.
For more detailed information on PTZ operation and OSD menu navigation, refer to the user
manual of your installed keyboard/control devices.
During the HDZ Series PTZ dome camera's startup process, the OSD Start Page will display
information including the camera ID number, protocol/baud rate and camera initializing
message. Additionally, if some camera errors occur, the error message(s) will be shown on the
screen at start-up. If the problem(s) cannot be immediately solved, please contact your supplier
for assistance.

On-Screen Display Overview

The HDZ Series PTZ camera on-screen display (OSD) elements are described in
below.
the elements shown in
Note When first time turning the Password Function on, please enter the
Master Password to setup the new password.
Master Password: 9527.
→
Note In the Camera OSD menu, the IRIS+ key functions as ENTER and the IRIS– key
functions as back/EXIT.
Figure 3-3 shows a monitor example with OSD elements numbered.
Figure 3-3.
symbol beside them, press right/left with the joystick or direction
↓
symbol beside them, press the IRIS+ key on
Understanding the OSD | 37
→↓
symbols
Table 3-1
Table 3-1 describes
800-16526 - A - 07/2014