Safety Instructions - Honeywell HDZ30A User Manual

4 | HDZ Series Analogue PTZ User Manual
Canadian Compliance Statement
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.
Manufacturer's Declaration of Conformance
The manufacturer declares that the equipment supplied with this guide is compliant with the
European Parliament and Council Directive on the Restrictions of the use of certain Hazardous
Substances in electrical and electronic equipment (2011/65/EU), General Product Safety
Directive (2001/95/EC) and the essential requirements of the EMC Directive (2004/108/EC),
conforming to the requirements of standards EN 55022 for emissions, EN 50130-4 for immunity,
and EN 60950-1 for electrical equipment safety.
WARNING
environment this product may cause radio interference in which
case the user may be required to take adequate measures.
WARNING
should be employed when powering the camera from 24 V AC.
Waste Electrical and Electronic Equipment (WEEE)

Safety Instructions

Before installing or operating the unit, read and follow all instructions. After
installation, retain the safety and operating instructions for future reference.
1.
2.
www.honeywell.com/security
This is a Class A product. In a domestic
To comply with EN50130-4 requirements, a UPS
Correct Disposal of this Product (applicable in the European Union and other
European countries with separate collection systems).
This product should be disposed of, at the end of its useful life, as per
applicable local laws, regulations, and procedures.
HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.
INSTALLATION
• Install in accordance with the manufacturer's instructions.
• Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
• Do not install indoor-rated models in outdoor locations.
• Any wall or ceiling mounting of the product should follow the manufacturer's
instructions and use a mounting kit approved or recommended by the manufacturer.