Mechanical Flip); Off (No Image Flip); Setting The Angle Adjuster; Setting The Pt Position - Honeywell HDZ30A User Manual

60 | HDZ Series Analogue PTZ User Manual
M.E. (Mechanical Flip)
M.E. is a standard mechanical PTZ operation. As the HDZ Series Camera tilts to the maximum
angle, it will pan 180°, and then continue tilting to keep tracking objects.

OFF (No Image Flip)

Select this item to disable the flip function.

Setting the Angle Adjuster

The item is for adjusting the angle range of the tilt motion (see
tilt motion varies in different FLIP modes. The angle ranges from -10° to +100° in the M.E. FLIP
and FLIP OFF modes, and from -10° to +190° in the IMAGE FLIP mode.

Setting the PT Position

PT Position can display the Pan/Tilt position of the Analogue PTZ Dome on the screen. See
On-Screen Display Overview on page 37
www.honeywell.com/security
Note Flip setting is manual-controlled only. If a Preset or a point for other function (ex.
Preset Tour) is set in the position that can only be reached through FLIP motion,
when Flip is off, the position cannot be reached anymore.
Note To make the HDZ Series Analogue PTZ Dome tilt between a specific range, such
as -10° to +100° or -10° to +190°, please go to the ANGLE ADJUSTER function
(see Setting the Angle Adjuster on page
ANGLE ADJUSTER options will change depending on which Flip mode is
selected. Otherwise, the dome will tilt up to 90° as the default setting.
Figure 4-10 Angle Adjuster Options
ANGLE ADJUSTER
MIN ANGLE
MAX ANGLE
EXIT+SET
60) to set the angle range of tilt. The
-10 DEG →
190 DEG →
YES
for the on-screen location the PT position is displayed.
Figure 4-10). The Range of the