Connecting Cables; Connecting The Power Cable; Main Power Model (100 Vac ~ 240 Vac, 50 Hz) - Honeywell HCD484E User Manual

Connecting Cables

Note Installation should only be done by qualified
service personnel or system installers.
Note Ensure that power to the camera is OFF before
handling the power cable, regardless of
whether the AC main power or low voltage 12
VDC / 24 VAC is used.

Connecting the Power Cable

Main Power Model (100 VAC ~ 240 VAC,
50 Hz)
1. Connect the AC power cord (supplied) firmly to the power
cord socket of the camera.
Figure 2
2. Firmly connect the other end of the power cord to an
electrical outlet of AC100V ~ AC240V, 50 Hz / 60 Hz.
Note Ensure that the power cord is long enough that
it will not pull off the camera when the camera
pans or tilts.
Brown = live, reference line lock.
Blue = neutral.
Accepted voltage range is 90 VAC ~ 260 VAC.
Rev 1.01
Main Power Model
Power input
100 VAC ~ 240 VAC
3 900.0355
01/06