Format Selection And H / V Phase Adjustment - Nac Hi-Moiton II Quick Manual

5

Format Selection and H / V Phase Adjustment

5.1 Format Selection
The Hi-Motion II supports 1080I59, 720P59, 1080P59, 1080I50, 720P50 and 1080P50 system
format. These are selectable as the image signal output.
A How to change System Format of different frequency (e.g. 1080/59.94i <-> 1080/50i)
Change both settings on the Camera Head and the CCU as follows. The Camera must be
changed first and the CCU second.
NOTE: GENLOCK must be disconnected before the setting.
1. Open the HEAD MENU on the VF output and change the
FORMAT on ENGINEER(1//2).
2. Turn off the power of the Camera
3. Show the color bar on PM1 output of the CCU by pressing BARS
4. Press
5. Keep pressing
6. Select one in the SYSTEM FORMAT by turning the Select Knob or the Next Knob, and press
7. Change the Frame Rate that is the same as the Camera Format.
8. Turn off the power of the CCU and reboot the system to complete the settings.
B How to change System Format of the same frequency (e.g. 1080/59.94i <-> 720/59.94p)
Change settings on the CCU as follows, so that the Camera settings are changed
automatically.
NOTE: GENLOCK must be disconnected before the setting.
1. Show the color bar on PM1 output of the CCU by pressing BARS
2. Press
3. Keep pressing
4. Select one in the SYSTEM FORMAT by turning the Select Knob or the Next Knob, and press
5. Change the Frame Rate. At that time, the camera reboots automatically.
6. Turn off the power of CCU and reboot the system to complete the settings.
SETUP button on the OCP and press
MENU
ENTER button.
SETUP button on the OCP and press
MENU
ENTER button.
button on the OCP to open the Main Menu of the CCU
button on the OCP to open the Main Menu of the CCU
9
FORMAT SELECT of CAMERA HEAD
button on the OCP.
CHARACTER button on the touch screen.
button on the OCP.
CHARACTER button on the touch screen.