Nac Hi-Moiton II Quick Manual page 40

9.11 Setting of output image right after recording
You can select the replay output images which recorded just after that.
- The replay output images : (HD-SDI OUT2 of back face of CCU / HDSDI-2 of back of camera
head / the connectors that indication is set in [PLAY] : MONITOR, HD-PM OUT1, HD-PM
OUT2)
You can set on head menu.
A
SLOW CONTROLLER on head menu MENU(1/2)page > Set in the pages of LIVE AFTER
REC.
LIVE AFTER REC ON
1
LIVE AFTER REC OFF
2
Behavior with LIVE AFTER REC ON
B
You can use this when you record multiple blocks in a row or you want to avoid outputting still
images with LIVE image output after recording.
When this mode is ON, the display switches from LIVE image to Play image by pressing PLAY
switch or so.
Also, when you move to the other block which is already recorded, still images of the selected
block are outputted instead of the LIVE image.
Behavior with LIVE AFTER REC OFF
C
After recording, a still image which is set with Play start frame is displayed.
* When the system format is set in 1080I59/720P59/1080I50/720P50, this setting functions.
* When the system format is set in 1080P59/1080P50, this setting is fixed to the setting in LIVE
AFTER REC : OFF without depending on the menu setting.
9.12 Collective stop operation of recording and playing
If you want to stop by one operation collectively when you are recording and playing at the same
time, you can do the following operation.
Press STOP button of Slow Controller and hold it for a few seconds.
A
All blocks being on recording or playing become stop status.
: LIVE image
: Play image (frame image set on the play start image)
40