Nac Hi-Moiton II Quick Manual page 12

5.3. How to adjust H / V Phase
1. Show the color bar on PM1 output of the CCU by pressing
OCP.
2. Press
screen.
3. Keep pressing
4. Select PHASE CONTROL by turning the Select Knob or the Next Knob, and press
ENTER
Adjust them according to the actual environment of the OB van.

HD MASTER V PHASE

HD OUT H TRACK

HD PM H TRACK

SYNC OUT H PHASE

SYNC OUT V PHASE
SETUP button on the OCP and press
MENU button on the OCP to open the Main Menu of the CCU.
button to show the following menu.
CHARACTER
Adjusts V Phase of all the HD-SDI OUT
Adjusts H Phase of HD-SDI1 and HD-SDI2
Adjusts V Phase of Picture Monitor
Adjusts H Phase of SYNC OUT
Adjusts V Phase of SYNC OUT
12
BARS button on the
button on the touch