Nac Hi-Moiton II Quick Manual page 34

E Press SHTL
F Press JOG
9.6 Block LOCK Function
A The Blocks you do not want to delete can be prevented from overwriting by locking Blocks.
(Refer to the following settings)
1 How to lock and unlock the Blocks
2 Double-click the Block you want to lock and the Blocks and the Block changes in LOCK and
UNLOCK alternatively. The Block Status on Character display shows key mark when the Block
is in LOCK, and does not show key mark in UNLOCK.
You can confirm even the memory block status of the LCD indication section of the slow
controller.
When the Block is in LOCK, "+" appears.
3 Double-click 0
B For the other way to lock the Blocks, there is a Auto LOCK Function after recording. See the
following settings.
1 How to set Auto LOCK
2 Press
3 Press
Controller.
・
・
Press
4
button and rotate the jog wheel, it plays back as shuttle playback.
button and rotate the jpg wheel, it plays back as jog playback.
and it unlocks all the Block.
AE button.
 
buttons and select the function as you see on the display of the Slow
021-LOCK/ON
022-LOCK/OFF
ENT button and complete the settings.
Locks automatically after recording
Does not lock automatically after recording
34