Monitor Information Caption - Nac Hi-Moiton II Quick Manual

7

Monitor Information Caption

Picture Monitor 1 of CCU rear panel, Picture Monitor 2 on the rear panel of CCU, and Monitor Output,
VF Output of the Camera have Information Caption for each Camera Status overlaid.
1 Block Status : Display the status of the selected Block
STOP
VIEW
REC
PLAY
LOOP
2 Available Recording Time / Remaining Playback Time : Display Available Recording Time or Remaining
Playback Time depending on the selected Block status
VIEW, REC
PLAY, LOOP
STOP
3 Progress Bar : Display the status of the Memory in each Camera Mode
REC
PLAY, LOOP
Playback Stop
Live Image Display
in Recording
in Playback
in Loop Playback (LOOP only available by Camera or J-PAD control)
Shows Available Recording Time(Sec) on the selected Block.
Shows Remaining Playback Time (Sec) from the current position to the
end of the frames with the selected playback speed.
Shows Remaining Playback Time (Sec) from the current position to the
end of frames at PLAY REF SPEED.
Shows the status of the Memory in Recording Mode. The left end is the
start position of the recording, and the right end is the end position of the
recording.
Displays Playback position out of all the recorded image clips on the
Blocks.
15
2. Available Recording Time / Remaining Playback Time
1. Block Status
16 .AUTO PLAY
3. Progress Bar
4. Time
12. Digital Gain
11. Alert
13. AWB ch
6. Trigger Mode
7. Frame Rate
8. Play Rate
14. Color Temperature
9. Shutter Speed
15. Back Ground Image
10. Memory Block Status
5. Block Recording Mode