Nac Hi-Moiton II Quick Manual page 58

1 INCOM1 Connector (Monaural Signal)
Connect a headset to the intercom system.
No. Name
1 TALK(C)
2 TALK(H)
3 LISTEN (C)
4 LISTEN (H)
・
・
2 INCOM2 Connector (Stereo Signal)
Connect a headset to the intercom system.
No. Name
1 TALK(C)
2 TALK(H)
3 SHIELD
4 LISTEN Lch (H)
5 LISTEN Rch (H)
・
・
3 HD SDI-1 Connector
LIVE video without captions are output as HD SDI signal.
・
・
・
・
・
4 HD SDI-2 Connector
REPLAY video without captions are output as HD SDI signal.
・
・
・
・
・
5 MONITOR / RET Connector
Outputs the HD SDI monitor signals via a BNC connector. MON or RETURN signals can be selected.
LIVE/REPLAY video with captions are selectable with the STBY button on MDC-50Tb and the select function
of OCP.
・
・
・
・
・
6 SYNC Connector
The complex connector has the following features.
Direction
GND Shield for Intercom Microphone Input (H)
IN Input for Intercom Microphone
GND Shield for LISTEN (H) Output
OUT LISTEN (H) Output
Connector : XLR-4-32-F77 (ITT CANNON) *4 pin male
Applicable Plug : XLR-4-11C or compatible
Direction
GND Shield for Intercom Microphone Input (H)
IN Input for Intercom Microphone
GND Shield for LISTEN L/LISTEN R Outputs
OUT LISTEN L Output (H)
OUT LISTEN R Output (H)
Connector : XLR-5-31-F77 (ITT CANNON)
Applicable Plug : XLR-5-12C or compatible
Connector : 75ohm BNC Receptacle
Applicable Plug : 75ohm BNC Plug
Function : Y, Pb, Pr 4:2:2 Digital Serial
Direction : OUT
Note : In conformity to BTA S-004B
Connector : 75ohm BNC Receptacle
Applicable Plug : 75ohm BNC Plug
Function : Y, Pb, Pr 4:2:2 Digital Serial
Direction : OUT
Note : In conformity to BTA S-004B
Connector : 75ohm BNC Receptacle
Applicable Plug : 75ohm BNC Plug
Function : Y, Pb, Pr 4:2:2 Digital Serial
Direction : OUT (IN when RET is selected)
Note : In conformity to BTA S-004B
VD IN : Use to synchronize the frame sync of the sensor with an external signal.
For 3D shooting with 2 cameras, VD OUT of one camera must be input
into VD IN of the other camera for frame synchronization.
VD OUT : Output the frame sync signal to drive the sensor
TRIGGER IN : Input the trigger signal
Function & In/Out Level
Function & In/Out Level
58
Note
*4 pin female
Note
*5 pin female
*5 pin male