Nac Hi-Moiton II Quick Manual page 25

8.7. Other functions and operations of OCP
A Color Space Setting for SMPTE / EBU / ITU-709
①.
How to change with OCP
Press
Select one from EBU, SMPTE, or ITU with a rotary encoder under
②.
How to change with HEAD MENU
Select one from ITU / EBU / SMPTE / OFF at MATRIX of PROCESS MODE in MENU(1/2) of the
HEAD MENU.
B How to use AUTO SET UP
Press SETUP
When using the Hi-Motion II, functions and operations of each button are as follows.
・ Full (Full Auto Setup)
・ Level (Level Auto Setup)
・ Full Quick (Full Quick Auto Setup)
・ Quick (Quick Auto Setup)
・ Black Shade (Auto Black Shade)
・ Skin Hue (Auto Hue Detect)
C How to adjust MASTER PED reference value
MASTER PED value returns to "0" (zero) after ABB, as default. If you want to set it other than "0" (zero),
adjust the MASTER PED value first. Then press
display ABB button. Keep pressing the ABB button until beep and press START button. When both
ABB and START buttons turn from Yellow to Green, the setup finished. After that the MASTER PED
returns to the set value after ABB.
D Collective stop operation for recording and playing
You perform the following operation to stop all by one operation when performing recording
and playing at the same time.
- Press STOP button of Slow Controller and hold it for a few seconds.
All blocks being on recording or playing become stop status.
SET UP on the OCP and go to
switch on the LCD display and press AUTO SET UP to show the following display.
COLOR , Matrix
Enables Auto White Shading
Invalid ( "STOP" is displayed on VF)
Invalid (beep)
Invalid ( "Stop" is displayed on VF)
Enables Auto Black Balance
Invalid ( "STOP" is displayed on VF)
MAINTE button on OCP and REF.SET button to
25
on the touch screen menu.
Matrix Select .