Nac Hi-Moiton II Quick Manual page 39

9.10 Setting the playing flicker correction
Set the flicker and noise suppression function for the video being played.
The playing flicker correction function is reflected on the playing video.
You can adjust the value with watching the playing video.
A Press the CTL button on the slow controller to enter the flicker correction mode.
While the flicker correction mode is in effect, the
B The flicker correction setting indication appears in the LCD indication section of the slow
controller.
①
ON/OFF setting of the flicker correction function
FL1 : Flicker Correction : ON
FL0 : Flicker Correction : OFF
②
GAIN value of the flicker correction
G00 ~ G10 : 10 level
③
Threshold of the flicker correction
T00 ~ T10 : 10 level
C Press the 0
The setting switches by each press like ON -> OFF -> ON ....

D Press

E Press
F If you press the
1
button and turn ON/OFF setting of the flicker correction function.
 of the cross-shaped button, and set a GAIN value of the flicker correction.
 of the cross-shaped button and set a threshold of the flicker correction.
CTL or ESC
AE button lights.
2 3
button, you can exit from Flicker Correction mode.
39