Nac Hi-Moiton II Quick Manual page 21

FLCR
OFF, ON
Flicker Correction ON/OFF
Selection. Valid only for the
playback images.
②.
SCENE FILE Switch
Saves / loads scene file 1 to 8. file group 1 to 4 and group 5 to 8 are selected by SHIFT switch.
Save : Press file a number button 1 to 8 in 2 seconds.
Load : Push file a number button 1 to 8.
Following parameters can be saved / loaded in each scene file.
・
SCENE 1-4
・
SCENE 5-8
・
SCENE OFF Return to the settings when SCENE switch is OFF.
FLGA
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Specify intensity
Correction.
This is valid when FLCR is ON.
Larger value gives more effect in
reducing flicker and noise but also
in increasing motion blur.
Please select appropriate one
depending on application /object.
[GRAY SCALE], [DETAIL], [COLOR]
[GRAY SCALE], [DETAIL], [COLOR], [FLCR], [FLGA], [FLTH]
21
1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Specify threshold
of Flicker
Correction.
This is valid when FLCR is ON.
Smaller value gives more effect in
reducing motion blur but also in
increasing flicker and noise.
This parameter
changed for fine-adjustment with
larger value of GAIN. When GAIN
value is small, this does not affect
images remarkably.
FLTH
of Flicker
should be