Nac Hi-Moiton II Quick Manual page 35

9.7 CUE / SEARCH
A When CUE
the time can be called easily in playback.
B When SEARCH
and to the next CUE point with a second press. Every
former CUE point and once it reaches to the first CUE point in the selected Block, it jumps to
the last CUE point of the Block.
C Pressing
between Blocks.
D CUE point can be assigned max. 10 points per a Block.
E PREROLL Setting is available (Refer to the following settings).
Pressing either one of
the Slow Controller as each light is On, pressing
jumps by offsetting the second of 3 digits that are set (0.1sec) to the past. Press each button
that is lit On again to release PREROLL function.
How to change each PREROLL Settings
1 Check 1
If the
2 Press
3 Press
>CONSOLE, then press
Press 7(↑)
4
5 Press 5 (-)
6 Press
button is pressed during recording, it memorizes the position of the time and
button is pressed, it jumps to the last CUE point in the selected Block,
 
buttons instead of pressing SEARCH button jumps to the CUE points
PREROLL 1
button of the CUE MODE SEL button's light is On on the top of the Slow Controller.
1 button's light blinks, press either 1
MENU button.
4(↓)
7(↑) buttons as you see on the display of the Slow Controller and select
ENT
4(↓) buttons and select each Hi2Preroll-1 / Hi2Preroll-2 / Hi2Preroll-3.
6(+) buttons and select value, and press ENT
MENU button to complete the settings.
SEARCH
PREROLL 2 PREROLL 3
SEARCH
or ESC
button.
35
press jumps back to the
buttons on the top of
 
button or
button to make it On.
button to confirm.
buttons