Nac Hi-Moiton II Quick Manual page 30

4 Press ENT button to complete the settings.
E When STOP
whatever the Trigger Mode is selected, and the Block does not jump to the next Block
Recording even in CONTINUOUS or LOOP Mode. (Refer to Chapter 9.3 F)
F Recording Mode has three types; SINGLE, CONTINUES and LOOP. In SINGLE Mode,
it only records in a Block and does not jump to the next Block Recording. In CONTINUES
Mode, it jumps to the next Block Recordings every time
after one round of all the divided Block (For example, if the Blocks are divided as 4 Blocks
and started with the 3rd Block, it ends at the 2nd Block after one round).
In LOOP Mode, it jumps to the next Block Recordings every time
and it continues until
Blocks that are being in LOCK and PLAY will not be overwritten. (Refer to Chapter 9.5)
1 How to change Recording Mode Settings.
2 SINGLE, CONTINUES, LOOP mode changes every time 0
3 Status of
・ SINGLE Mode
・ CONTINUOUS Mode
・ LOOP Mode
4 You can confirm even the block recording mode of the LCD indication section of the slow
controller. "S" : SINGLE / "C" : CONTINUOUS / "L" : LOOP
button is pressed, the Block Recording stops as END Trigger Mode even in
STOP button is pressed. When in CONTINUES or LOOP Mode, the
0 and Display of PM2 output at each Mode.
No light on 0
Light On on
Light Blinks on
30
REC button is pressed and ends
button is pressed.
(S displays at the lower left on PM2 output)
0 (C displays at the lower left on PM2 output)
0 (L displays at the lower left on PM2 output)
REC button is pressed,