Table of Contents
Advertisement
C
How to assign IN point and OUT point
IN point and OUT point can be assigned by pressing
1
IN
2
If
IN or
base becomes valid and all the past Time Code will be deleted.
3
When there is
well as the side bar on PM1 and PM2 monitor as follows.
4
Double-clicking IN
9.9
Auto Play Mode
Please press
TC
The mode is changed with every press of
e.g. Auto Play ON > Auto Play OFF > Auto Play ON...
A
TC button status in Auto Play mode
1
Auto Play mode OFF
2
Auto Play mode ON
NOTE : Default setting of
when the firmware is updated. In order to show or hide
HEAD MENU: MENU(1/2)>VF DISPLAY>CHARACTER SET>[AUTO PLAY].
B
General Operation in Auto Play mode
1
Press
2
At that time, a recording Block will move to the next and the recorded Block is automatically locked.
The LOCK mark appears in the Memory Block Status and the camera automatically starts playing
back the data in the Block.
3
Playback range will be from the starting point specified with the PLAY POSITION (selected in the
HEAD MENU) to the last frame in the Block.
4
After playing back all the range, the LOCK mark disappear and the camera starts playing back the
data in the next Block, not played yet.
5
During the Auto Play, buttons like
wheel operations are valid.
When playing back until the last frame, playback of the Block is regarded as completed.
and
OUT can be assigned one point for each.
OUT
is pressed after assigning IN and OUT , the last press point in Time Code
IN
or
OUT
No IN or OUT information
or
OUT
button to turn ON/OFF the Auto Play mode.
: Indicator of
: Indicator of
A mark display is OFF for all the outputs (VF, MONITOR, PM1, and PM2)
REC
button to start recording.
information,
IN
or
IN or OUT information
will remove the stored Time Code.
TC button,
TC
button is OFF
TC
button is ON
and
A
mark appears on the PM display
A mark, please set it up manually at the
STOP ,
PLAY ,
FWD ,
37
IN
and
OUT
of Slow Controller.
OUT
on Slow Controller turns on as
REW , numerical keypad, and Jog
Hide quick links:
Advertisement
Table of Contents
