Nac Hi-Moiton II Quick Manual page 28

9.2. How to Switch between LIVE and REPLAY
A The operator of the Slow Controller operates by looking at PM2 output of the CCU. At this
time, select either LIVE or REPLAY image for the overlaid image of PM2 output.
1 How to change LIVE and REPLAY on PM2 output.
2 LIVE and REPLAY image switches alternatively every time STANDBY
○displays when in LIVE and  displays when in REPLAY at the lower right of PM2 output.
3
4 You can confirm even the display channel of the LCD indication section of the slow controller.
For LIVE image, "-" appears. For PLAY image, ">" appears.
9.3 Block Recording
A The memory can be divided max. 8 Blocks.
B The number of Blocks can be set by the following procedure. Please note that all the
recorded memory is deleted when the number of Blocks is changed.
1 How to change the number of Blocks
2 Press
3 Press the desired number of Blocks and select from
4 Press
C Pressing the numeric key selects the desired Block.
ASSEMBLE button.
ENT button to complete the settings.
1 to 8 .
28
button is pressed.