Nac Hi-Moiton II Quick Manual page 33

6 Press MENU
D When VAR1
according to the FPS Setting value stated on the below of the each buttons.(Refer to the
following settings) It ranges from -1200 to +1200. It means Play in Backwards when all dots
of 4 digits blink.
How to change each VAR Settings
1 Check 1
2 If the 1 button's light blinks, press either 1
3 Press MENU
7(↑)
4 Press
>CONSOLE, then press
Press 7(↑)
5
6 Press 5(-)
7 Press MENU
button to complete the settings.
VAR2 VAR3 buttons are pressed, the image clip is played back
button of the CUE MODE SEL button's light is On on the top of the Slow Controller.
button.
4(↓)
buttons as you see on the display of the Slow Controller and select
ENT button.
4(↓) buttons and select each VAR-1 / VAR-2 / VAR-3.
6(+) buttons and select value, and press ENT button to confirm.
button to complete the settings.
33
or ESC button to make it On.