Nac Hi-Moiton II Quick Manual page 52

ENGINEER MENU (1/2)
 CAMERA HEAD FORMAT
1080I59, 720P59, 1080P59, 1080I50, 720P50, 1080P50
FORMAT SELECT
Changes Image Output Format of the Camera. The Format has to be
identical with CCU Format when Camera is connected to CCU.
 SENSOR MAINTENANCE
 Specify Sensor BIAS settings
DEFAULT, USER
BIAS SET
Usually set to DEFAULT. Set to USER when you change R/G/Bch gain or
offset value as the following chart shows.
COLOR TEMP
SENSITIVITY
USER SET
Changes R/G/Bch gain and offset value at selected COLOR TEMP,
SENSITIVITY. If these values are changed, the system memorizes this value
even the camera is turned off.
DEFAULT ALL
The above settings become DEFAULT＝Factory Set.
 SYSTEM MAINTENANCE
DOT NOISE CANCEL
DOT
NOISE CANCEL
Normally CANCEL ON and set LEVEL as 256.
FLICKER AVERAGE
LIVE IMAGE
Flicker Correction in Live view. DEFAULT is ON.
FLICKER CORRECTION
Flicker Correction in Play view.
Specifies intensity of Flicker Correction. Larger value gives more effect in
reducing flicker and noise but also in increasing motion blur.
PLAY IMAGE
Specifies threshold of Flicker Correction. Smaller value gives more effect in
reducing motion blur but in increasing flicker and noise. This parameter
should be changed for fine-adjustment with higher value of GAIN. When
GAIN value is small, this does not affect images remarkably.
3D CONTROL MASTER, SLAVE
R AMPLITUDE
R SETUP
G AMPLITUDE
G SETUP
B AMPLITUDE
B SETUP
LEVEL
GAIN
THRESH
52
3200K, 5600K, 6300K, 7500K
-3dB, 0dB, +3dB, +6dB
0.00 - 4.20
YES, NO
ON, OFF
0 - 1023
OFF, ON
OFF, ON
1 - 10
1 - 10