Nac Hi-Moiton II Quick Manual page 19

⑧
AWB / ABB Switch
Executes AWB (Auto White Balance) or ABB (Auto Black Balance). After completing
execution, lamp turns off when the result is good, but lamp blinks when the result is no good.
In case of NG, press this switch to clear lamp blinking.
8.2. LCD Menu Portion
①
FUNCTION Switch
・
・
・
・
・
・
②
LCD Touch Screen
Combines LCD panel and touch sensor. It has both display function and switch function to use for
various camera control setting.
③
Rotary Encoder Knob
Used to control parameters when function switches are displayed on LCD display.
CAL OFF(Light OFF) -> CAL100% (Light ON) -> CAL200% (Blink) -> CAL OFF (Light
)
OFF
INFO Switch
Indicates status information such as ON/OFF setting condition of Camera Head or
BS/CCU on LCD display.
OPE Switch
Simplified Operation of the Slow Controller and
MENU.
SETUP Switch
Enables LCD menu to setup mode.
MAINTE Switch
Enables LCD menu to maintenance mode.
USER Switch
Can be recalled one function to the LCD screen. User can assign one function to this
switch and it can be recalled by pressing this switch.
WFM / PM Switch
Calls WFM (Waveform Monitor) / PM (Picture Monitor) selection switch on LCD display.
19
MENU button to show the HEAD