Nac Hi-Moiton II Quick Manual page 49

MENU (2/2)
 AUTO IRIS SET
OFF, ON
IRIS SET MODE
Setting for ON/OFF of each Auto Iris Control.
-100 - +100
IRIS LEVEL SET
Setting for Auto Iris Range.
-100 - +100
PEAK RATIO SET
Setting for Iris Correction when the Contrast is high.
1 - 100
IRIS GAIN
Setting for Iris Response Sensitivity.
1 - 100
IRIS SPEED
Setting for Iris Response Speed.
F22, F20, F18, F16
IRIS LIMIT
Setting for Iris Limit Value in close direction when in Auto Iris Mode.
OFF, F2.8, F16
LENS ADJUST
Setting for Control Voltage Output of Lens Iris Adjustment.
 AUTO SETUP MODE
ON, OFF
AWB WITH A.IRIS
Setting for ON/OFF of Auto Iris Control when AWB performed.
ON, OFF
AWB REFERENCE
Setting for validity of AWB converge value.
AWB, ABB
REFERENCE SET Performing this command after desired B/W setting stores the R/G and B/G
as Reference.
Note: DIP-SW must be set with the Camera Head prior to this change.
 SW ASSIGN
RET-1, ZOOM-, FOCUS-, NONE
RET-1 (HANDLE)
Assigns the selected functions on RET-1 (HANDLE).
RET-2, ZOOM+, FOCUS+, NONE
RET-2 (HANDLE)
Assigns the selected functions on RET-2 (HANDLE).
1 - 100
ZOOM SPEED
Setting for Zoom Speed when RET1 and 2 is assigned for.
1 - 100
FOCUS SPEED
Setting for Focus Speed when RET1 and 2 is assigned for.
OFF, RET-1, PROD MIC, ENG MIC, ENG+PROD MIC, TRIG, VF OUT,
VF CHAR
RET (LENS)
Assigns a function when pressing the RET button on an ENG lens.
OFF, PROD MIC, ENG MIC, ENG+PROD MIC, TRIG, RET-2, VF OUT,
VF CHAR
VTR (LENS)
Assigns a function when pressing the VTR button on an ENG lens.
49