Table of Contents
Advertisement
8.5.
IRIS / PEDESTAL Control Portion
①.
IRIS Indicator
To display F number of lens. Indicate "---" without F number at F16 to Close.
②.
AUTO IRIS Switch
To set AUTO IRIS mode.
③.
LENS EXT Indicator
Lights up when the lens extender is ON.
④.
FULL / RELATIVE Switch
・
FULL Switch
To fix "IRIS Control" to FULL Range.
・
RELATIVE Switch
To set "IRIS Control" to Relative Mode.
⑤.
RANGE / SENS Control Knob
・
RANGE Control Knob
To set center position of Item" IRIS Control".
・
SENS Control Knob
To set knob rotation sensitivity of Item "IRIS Control".
Sensitivity can be set from +/- 1 F stop to +/- 2 F stop.
⑥.
CALL Switch
To press to light RED TALLY of camera head and CCU.
Call switch will light when call switch of camera head and BS/CCU is pressed.
⑦.
PREVIEW Switch
When this switch is operated, the PREVIEW signal is output from the EXT-2(PREVIEW)
connector. And, the PREVIEW signal is output from networked BS hub and CCU.
While pressing PREVIEW Switch, PV(-) and COM of EXT-2(PREVIEW) Connector are
contacted. But PREVIEW Switch is not pressed, PV(+) and COM of EXT-2(PREVIEW)
connector are contacted.
⑧.
JOYSTICK
To control IRIS and Master PEDESTAL by joystick. At the AUTO IRIS mode, IRIS can be
controlled with +/- 1 stop of F number. Press joystick head to PREVIEW switch "ON". Control
action is parallel operation with PREVIEW Switch.
23
Hide quick links:
Advertisement
Table of Contents
