Nac Hi-Moiton II Quick Manual page 32

C For T-Bar control after
according to the desired T-Bar position. For T-Bar playback speed, the playback stops at
End position and it plays back with T-Bar Top Speed at Top position.(Refer to the following
settings)
How to change T-Bar Top Speed Settings
1 Check 1
If the 1 button's light blinks, press either 1
2 Press MENU
7(↑)
3 Press
>CONSOLE, then press
Press 7(↑)
4
5 Press 5(-)
・
PLAY 0.5x
・
PLAY 1.0x
・
FRAME 1x
・
FRAME 2x
VAR button is pressed, the image clip can be played back
button of the CUE MODE SEL button's light is On on the top of the Slow Controller.
button.
4(↓)
buttons as you see on the display of the Slow Controller and select
ENT button.
4(↓) buttons and find Hi2TbarPtn.
6(+) buttons and select the followings, and press
0.5x faster than PLAY REF SPEED
1x faster than PLAY REF SPEED
1x faster than FRAME RATE
2x faster than FRAME RATE
32
or ESC button to make it On.
ENT button to confirm.