Nac Hi-Moiton II Quick Manual page 47

VF REC TALLY
COLOR VF
FRONT TALLY
 VIDEO OUTPUT MODE
VF OUT SEL
MON OUT SEL
UNDER 0%
 LEVEL ADJUST
 LEVEL ADJUST cannot be changed when CCU is connected. This only works when in Stand Alone
Style.
When OCP is connected with Camera Head, LEVEL ADJSUT can be changed only with OCP.
MASTER GAMMA
MASTER PED
MASTER FLARE
DTL GAIN
ADJ CLR
ZEBRA2 DETECT
Setting for the detection level of ZEBRA 2.
ZEBRA IND LVL
Setting for Brightness of ZEBRA Indicator.
G, R, OFF
Setting for Tally color on VF when recording.
AUTO, ON
Setting for Automatic Recognition Function when Color VF is connected.
ENABLE, DISABLE
Setting for Front Tally on Color VF. ENABLE/DISABLE can only be
changed when COLOR VF ON. ENABLE is only selectable when COLOR
VF OFF (DISABLE is not displayed).
LIVE, PLAY
VF Output can be selected from LIVE or REPLAY.
LIVE, PLAY, RET IN
LIVE, PLAY：MON OUT from Camera can be selected.
RET IN：This feature only available when in Stand Alone Style. Image that
is input can be displayed on the viewfinder by pressing RET keys
on the lenses.
*The displayable image is only one channel no matter the position of the
RET SEL or RET key 1/2, and this does not function when CCU is
connected.
*The system retains the setting made before the power in turned OFF,
even if the power is turned OFF after operation.
DISABLE, ENABLE
Setting for the cut of output image's video level.
-100 - +100
Setting for Master Gamma.
-100 - +100
Setting for Master Pedestal.
-100 - +100
Setting for Master Flare.
-100 - +100
Setting for DTL Gain.
READY/PUSH_SET→CLR/CANCEL
Set the value that is selected in LEVEL ADJUST to default.
47
30% - 109%
1 – 100