Oce Arizona 6160 XTS User Manual page 121

NOTE
Optional - not required if the layer definitions were correctly specified in the ONYX profile or
quickset.
7. Send the job to the printer and then print it.
NOTE
To preview the layer order of the job on the printer, click Layers for the job in the printer
software UI.
Configuring Quality‐Layered Print Mode To Print White Ink
The Quality-Layered print mode can be used to print three, two, or one layer of image data or
printer generated flood data. All layers are independent of each other.
Where to Define Layers
Quality-Layered layers are defined in ONYX media - mode options, but may be optionally
overridden within a Quick Set - Media Options, and optionally overridden on a per job basis by
modifying the printer settings of a processed job in RIP Queue - right click the job and edit print
settings. Editing the print settings for a job displays the following dialog:
Layer Definitions
The layers are identified as bottom, middle and top. The bottom layer is printed first (if it is not
empty) and the top layer is printed last (if it is not empty).
Use the layer indicated to print the following white ink applications:
Under‐printing white ink for non‐white media
• Top - CMYK
• Middle - W (spot data or printer generated flood)
• Bottom – W (spot data or printer generated flood)
Over‐printing white ink for backlit applications viewed 2
• Top - W (spot data or printer generated flood)
• Middle - CMYK (mirrored)
• Bottom – CMYK (mirrored)
Print white ink for middle layer for a day‐night application viewed 2
• Top - CMYK (mirrored)
Océ Arizona 6100 Series
nd
surface
nd
surface
Chapter 7 ‐ How to Manage a White Ink Workflow
How to Print White Ink Jobs
121